Ethan-A
Device pinout
API function description
- class pywpc.EthanA
Power input: 24VDC
10/100 T-based Ethernet interface
Analog input: 8ch simultaneous and 16-bit single-ended
Max. sampling rate: 20kHz
Input range: +/-10V
- AI_close(port, timeout=3)
Close AI module on a given port.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- AI_closeStreaming(port, timeout=3)
Close AI streaming acquisition on a given port. This parameter is only effective for the “N-samples” and “continuous” modes.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async AI_closeStreaming_async(port)
Close AI streaming acquisition on a given port with async mode. This parameter is only effective for the “N-samples” and “continuous” modes.
- async AI_close_async(port)
Close AI module on a given port with async mode.
- AI_enableCS(slot, chip_select=[0], timeout=3)
Set AI chip selection on a given slot. This API is only effective for STEM.
- Parameters
- slotint
Slot number. See here for available ports of different WPC devices.
- chip_selectlist
Chip-number
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async AI_enableCS_async(slot, chip_select=[0])
Set AI chip selection on a given slot with async mode. This API is only effective for STEM.
- Parameters
- slotint
Slot number. See here for available ports of different WPC devices.
- chip_selectlist
Chip-number. The default chip number is 0.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- AI_enableChannel(port, channel, timeout=3)
Set AI channel on a given port. This API is only effective for USBDAQF1AD and USBDAQF1AOD.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- channelint
The number of channels that you want to enable. If this parameter is set to 4, it means the AI channel is open from channel 0 to 3.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async AI_enableChannel_async(port, channel)
Set AI channel on a given port with async mode. This API is only effective for USBDAQF1AD and USBDAQF1AOD.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- channelint
The number of channels that you want to enable. If this parameter is set to 4, it means the AI channel is open from channel 0 to 3.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- AI_open(port, timeout=3)
Open AI module on a given port.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- AI_openStreaming(port, timeout=3)
Open streaming acquisition on a given port. This parameter is only effective for the “N-samples” and “continuous” modes.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async AI_openStreaming_async(port)
Open streaming acquisition on a given port with async mode. This parameter is only effective for the “N-samples” and “continuous” modes.
- async AI_open_async(port)
Open AI module on a given port with async mode.
- AI_readOnDemand(port, timeout=3)
Read one sample from a given port. This should only be used in the “on demand” mode.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- samplelist of float
List of AI values in volt that are measured on enabled channels.
- async AI_readOnDemand_async(port)
Read one sample from a given port with async mode. This should only be used in the “on demand” mode.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- Returns
- samplelist of float
List of AI values in volt that are measured on enabled channels.
- AI_readStreaming(port, num_samples, delay=0.005)
Read AI streaming samples from a given port.
After streaming starts, data are acquired by the DAQ with the rate indicated by configuration. The data are then streamed to the PC and are stocked in a queue in the WPC device handle. Users should call this function to retrieve them from the queue.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- num_samplesint
Number of samples to get out from the queue. A sample is a list of values measured simultaneously from different channels. If there are fewer samples than the expected number, the function will return all available ones after
delayseconds expire.- delayfloat
Time in seconds to wait for the indicated amount of data to arrive. This becomes ineffective if there are already num_samples samples in the queue.
- Returns
- sample_listlist of list of float
AI data in volt. Each element of
sample_listis a sample. A sample is a list of values measured simultaneously from different channels. For eachi,len(sample_list[i])should be equal to the number of enabled channels.
- async AI_readStreaming_async(port, num_samples, delay=0.005)
Read AI streaming samples from a given port with async mode.
After streaming starts, data are acquired by the DAQ with the rate indicated by configuration. The data are then streamed to the PC and are stocked in a queue in the WPC device handle. Users should call this function to retrieve them from the queue.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- num_samplesint
Number of samples to get out from the queue. A sample is a list of values measured simultaneously from different channels. If there are fewer samples than the expected number, the function will return all available ones after
delayseconds expire.- delayfloat
Time in seconds to wait for the indicated amount of data to arrive. This becomes ineffective if there are already num_samples samples in the queue.
- Returns
- sample_listlist of list of float
AI data in volt. Each element of
sample_listis a sample. A sample is a list of values measured simultaneously from different channels. For eachi,len(sample_list[i])should be equal to the number of enabled channels.
- AI_setMode(port, mode, timeout=3)
Set AI acquisition mode on a given port.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- modeint
Acquisition mode. 0: on demand, 1: N-samples, 2: continuous.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async AI_setMode_async(port, mode)
Set AI acquisition mode on a given port with async mode.
- AI_setNumSamples(port, num_samples, timeout=3)
Set number of AI samples to acquire on a given port. This parameter is only effective for the “N-samples” mode.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- num_samplesint
Number of samples. A sample is a list of values measured simultaneously from different channels. If N channels have been enabled, then a sample is made of N values.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async AI_setNumSamples_async(port, num_samples)
Set number of AI samples to acquire on a given port with async mode. This parameter is only effective for the “N-samples” mode.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- num_samplesint
Number of samples. A sample is a list of values measured simultaneously from different channels. If N channels have been enabled, then a sample is made of N values.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- AI_setSamplingRate(port, sampling_rate, timeout=3)
Set AI sampling rate on a given port. This parameter is only effective for the “N-samples” and “continuous” modes.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- sampling_ratefloat
Sampling rate in Hz.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async AI_setSamplingRate_async(port, sampling_rate)
Set AI sampling rate on a given port with async mode. This parameter is only effective for the “N-samples” and “continuous” modes.
- AI_setTriggerMode(port, mode, timeout=3)
Set AI trigger mode.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- modeint
0: Use CMD to start AI streaming 1: Use RTC to start AI streaming 2: Use EXTI to start AI streaming 3: Use CMD & RTC to start AI streaming 4: Use CMD & EXTI to start AI streaming 5: Use RTC & EXTI to start AI streaming 6: Use CMD & RTC & EXTI to start AI streaming
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async AI_setTriggerMode_async(port, mode)
Set AI trigger mode with async mode.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- modeint
0: Use CMD to start AI streaming 1: Use RTC to start AI streaming 2: Use EXTI to start AI streaming 3: Use CMD & RTC to start AI streaming 4: Use CMD & EXTI to start AI streaming 5: Use RTC & EXTI to start AI streaming 6: Use CMD & RTC & EXTI to start AI streaming
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- AI_startStreaming(port, timeout=3)
Start streaming acquisition on a given port. This parameter is only effective for the “N-samples” and “continuous” modes.
- Parameters
- portint
Port number. See here for available ports of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async AI_startStreaming_async(port)
Start streaming acquisition on a given port with async mode. This parameter is only effective for the “N-samples” and “continuous” modes.
- Logger_openFile(filename, clear_old=True, verbose=True)
Open CSV file.
- Parameters
- filenamestr
The file name.
- clear_oldbool, default: True
Whether to clear old data (if the file alread exists) or not.
- verbosebool, default: True
Whether to print message out.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- Logger_write2DList(value_mat)
Write list of list into file.
- Parameters
- value_matlist of list
The list of list of data to be written.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- Logger_writeHeader(header)
Write header into file.
- Parameters
- headerlist of str
Header to be written.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- Logger_writeList(value_list)
Write list into file.
- Parameters
- value_listlist
The list of data to be written.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- Logger_writeValue(value)
Write value into file.
- Parameters
- valueobject
The data to be written.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- Net_getGateway(timeout=3)
Get geteway from the connected web device.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- gatewaystr of 4 int separated by period.
Network gateway.
- async Net_getGateway_async()
Get geteway from the connected web device with async mode.
- Returns
- gatewaystr of 4 int separated by period.
Network gateway.
- Net_getIPAddrAndSubmask(timeout=3)
Get IP address and subnet mask from the connected web device.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- network_infolist of 2 str.
network_info[0]: IP addressnetwork_info[1]: subnet mask
- async Net_getIPAddrAndSubmask_async()
Get IP address and subnet mask from the connected web device with async mode.
- Returns
- network_infolist of 2 str.
network_info[0]: IP addressnetwork_info[1]: subnet mask
- Net_getMACAddr(timeout=3)
Get MAC address from the connected web device.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- mac_addrstr of 6 int separated by colon.
MAC address.
- async Net_getMACAddr_async()
Get MAC address from the connected web device with async mode.
- Returns
- mac_addrstr of 6 int separated by colon.
MAC address.
- Net_setIPAddrAndSubmask(ip_addr, subnet_mask='255.255.255.0', timeout=3)
Set IP address and subnet mask to the connected web device.
- Parameters
- ip_addrstr of 4 int separated by period.
IP network address.
- subnet_maskstr of 4 int separated by period.
Subnet mask. (default: “255.255.255.0”)
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Net_setIPAddrAndSubmask_async(ip_addr, subnet_mask='255.255.255.0')
Set IP address and subnet mask to the connected web device with async mode.
- Parameters
- ip_addrstr of 4 int separated by period.
IP network address.
- subnet_maskstr of 4 int separated by period.
Subnet mask. (default: “255.255.255.0”)
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- SNTP_getPeriod(timeout=3)
Get the SNTP period.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- periodfloat
Period of synchronization in [sec].
- async SNTP_getPeriod_async()
Get the SNTP period with async mode.
- Returns
- periodfloat
Period of synchronization in [sec].
- SNTP_getServerIP(timeout=3)
Get the SNTP server IP.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- IPstr of 4 int separated by period.
IP address of the target SNTP server; 255.255.255.255 means automatic search.
- async SNTP_getServerIP_async()
Get the SNTP server IP with async mode.
- Returns
- IPstr of 4 int separated by period.
IP address of the target SNTP server; 255.255.255.255 means automatic search.
- SNTP_getSyncStatus(timeout=3)
Get the SNTP status.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- IPstr of 4 int separated by period.
IP address of the connected SNTP server; 0.0.0.0 means no server is reachable.
- async SNTP_getSyncStatus_async()
Get the SNTP status with async mode.
- Returns
- IPstr of 4 int separated by period.
IP address of the connected SNTP server; 0.0.0.0 means no server is reachable.
- SNTP_setPeriod(period, timeout=3)
Set the SNTP period.
- Parameters
- periodfloat
Period of synchronization in [sec].
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async SNTP_setPeriod_async(period)
Set the SNTP period with async mode.
- Parameters
- periodfloat
Period of synchronization in [sec].
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- SNTP_setServerIP(ip_addr='255.255.255.255', timeout=3)
Set the SNTP server IP.
- Parameters
- ip_addrstr of 4 int separated by period.
IP address of the target SNTP server; 255.255.255.255 means automatic search.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async SNTP_setServerIP_async(ip_addr='255.255.255.255')
Set the SNTP server IP with async mode.
- Parameters
- ip_addrstr of 4 int separated by period.
IP address of the target SNTP server; 255.255.255.255 means automatic search.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- SNTP_syncNow(timeout=3)
Synchronize SNTP.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async SNTP_syncNow_async()
Synchronize SNTP with async mode.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- Sys_getDeviceAlias(timeout=3)
Get device alias name.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- Alias namestring
The alias name of the device.
- async Sys_getDeviceAlias_async()
Get device alias name with async mode.
- Returns
- Alias namestring
The alias name of the device.
- Sys_getDriverInfo(timeout=3)
Get device firmware information.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- driver_infolist of three string
driver_info[0]: Model name.driver_info[1]: Mode.driver_info[2]: Firmware version.
- async Sys_getDriverInfo_async()
Get device firmware information with async mode.
- Returns
- driver_infolist of three string
driver_info[0]: Model name.driver_info[1]: Mode.driver_info[2]: Firmware version.
- Sys_getGateway(timeout=3)
Deprecated in v1.0.5. Will be removed in v1.2.0.
See :ref:
Net_getGateway.
- async Sys_getGateway_async()
Deprecated in v1.0.5. Will be removed in v1.2.0.
See :ref:
Net_getGateway_async.
- Sys_getIPAddrAndSubmask(timeout=3)
Deprecated in v1.0.5. Will be removed in v1.2.0.
See :ref:
Net_getIPAddrAndSubmask.
- async Sys_getIPAddrAndSubmask_async()
Deprecated in v1.0.5. Will be removed in v1.2.0.
See :ref:
Net_getIPAddrAndSubmask_async.
- Sys_getMACAddr(timeout=3)
Deprecated in v1.0.5. Will be removed in v1.2.0.
See :ref:
Net_getMACAddr.
- async Sys_getMACAddr_async()
Deprecated in v1.0.5. Will be removed in v1.2.0.
See :ref:
Net_getMACAddr_async.
- Sys_getMode(slot, timeout=3)
Get the mode from a given slot.
- Parameters
- slotint
Slot number. See here for available slot of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- str_str
Mode of slot.
- async Sys_getMode_async(slot)
Get the mode from a given slot with async mode.
- Parameters
- slotint
Slot number. See here for available slot of different WPC devices.
- Returns
- str_str
Mode of slot.
- Sys_getPinModeInPort(port, timeout=3)
Get pin mode in specific port.
- Parameters
- portint
See here for available ports of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- pinsint
How many pins in specific port.
- pin_modelist of 8 string
[pin0, pin1,……pin7]
pinmode : Disabled, Idle, DI, DO, UART, I2C, SPI, CAN, PWM and ADC.
- async Sys_getPinModeInPort_async(port)
Get pin mode in specific port with async mode.
- Parameters
- portint
See here for available ports of different WPC devices.
- Returns
- pinsint
How many pins in specific port.
- pin_modelist of 8 string
[pin0, pin1,……pin7]
pinmode : Disabled, Idle, DI, DO, UART, I2C, SPI, CAN, PWM and ADC.
- Sys_getPythonVersion(timeout=3)
Get python software version.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- versionstring
- async Sys_getPythonVersion_async()
Get python software version with async mode.
- Returns
- versionstring
- Sys_getRTC(timeout=3)
Get RTC date and time.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- str_str
- Date and time represented by “A-B-C, D:E:F”.
“A” is year.
“B” is month.
“C” is day.
“D” is hour.
“E” is minute.
“F” is second.
- async Sys_getRTC_async()
Get RTC date and time with async mode.
- Returns
- str_str
- Date and time represented by “A-B-C, D:E:F”.
“A” is year.
“B” is month.
“C” is day.
“D” is hour.
“E” is minute.
“F” is second.
- Sys_getSerialNumber(timeout=3)
Get serial number.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- str_str
Serial number represented by string of 8 characters.
- async Sys_getSerialNumber_async()
Get serial number with async mode.
- Returns
- str_str
Serial number represented by string of 8 characters.
- Sys_reboot(timeout=3)
Reboot the device.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_reboot_async()
Reboot the device with async mode.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- Sys_setAIOMode(slot, timeout=3)
Set the AIO state on a given slot.
- Parameters
- slotint
Slot number. See here for available slot of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_setAIOMode_async(slot)
Set the AIO state on a given slot with async mode.
- Sys_setDIMode(slot, timeout=3)
Set the DI state on a given slot.
- Parameters
- slotint
Slot number. See here for available slot of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_setDIMode_async(slot)
Set the DI state on a given slot with async mode.
- Sys_setDIOMode(slot, timeout=3)
Set the DIO state for the slot in the connected WPC device.
- Parameters
- slotint
Slot number. See here for available slot of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_setDIOMode_async(slot)
Set the DIO state for the slot in the connected WPC device with async mode.
- Sys_setDOMode(slot, timeout=3)
Set the DO state for the slot in the connected WPC device.
- Parameters
- slotint
Slot number. See here for available slot of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_setDOMode_async(slot)
Set the DO state for the slot in the connected WPC device with async mode.
- Sys_setDeviceAlias(alias, timeout=3)
Set the alias name of the device.
- Parameters
- aliasstr
The alias name of the device
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_setDeviceAlias_async(alias)
Set the alias name of the device.
- Parameters
- aliasstr
The alias name of the device
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- Sys_setIPAddrAndSubmask(ip_addr, subnet_mask='255.255.255.0', timeout=3)
Deprecated in v1.0.5. Will be removed in v1.2.0.
See :ref:
Net_setIPAddrAndSubmask.
- async Sys_setIPAddrAndSubmask_async(ip_addr, subnet_mask='255.255.255.0')
Deprecated in v1.0.5. Will be removed in v1.2.0.
See :ref:
Net_setIPAddrAndSubmask_async.
- Sys_setIdleMode(slot, timeout=3)
Set the IDLE state on a given slot.
- Parameters
- slotint
Slot number. See here for available slot of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_setIdleMode_async(slot)
Set the IDLE state on a given slot with async mode.
- Sys_setMotionMode(slot, timeout=3)
Set the motion state on a given slot.
- Parameters
- slotint
Slot number. See here for available slot of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_setMotionMode_async(slot)
Set the motion state on a given slot with async mode.
- Sys_setRTC(year, month, day, hour, minute, second, timeout=3)
Set RTC date and time.
- Parameters
- yearint
year (CE).
- monthint
month (1~12).
- dayint
day (1~31).
- hourint
hour (24-hour clock) (0~23).
- minuteint
minute (0~59).
- secondint
second (0~59).
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_setRTC_async(year, month, day, hour, minute, second)
Set RTC date and time with async mode.
- Parameters
- yearint
year (CE).
- monthint
month (1~12).
- dayint
day (1~31).
- hourint
hour (24-hour clock) (0~23).
- minuteint
minute (0~59).
- secondint
second (0~59).
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- Sys_setSwitchMode(slot, timeout=3)
Set the switch state on a given slot.
- Parameters
- slotint
Slot number. See here for available slot of different WPC devices.
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_setSwitchMode_async(slot)
Set the switch state on a given slot with async mode.
- Sys_startRTCAlarm(mode, day, hour, minute, second, timeout=3)
Start RTC time to alarm AI.
- Parameters
- modeint
0: Day value interpreted as calendar day. 1: Day value interpreted as weekday.
- dayint
Celendar day (1~31)/ Weekday (1~7).
- hourint
hour (24-hour clock) (0~23).
- minuteint
minute (0~59).
- secondint
second (0~59).
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_startRTCAlarm_async(mode, day, hour, minute, second)
Start RTC time to alarm AI with async mode.
- Parameters
- modeint
0: Day value interpreted as calendar day. 1: Day value interpreted as weekday.
- dayint
Celendar day (1~31)/ Weekday (1~7).
- hourint
hour (24-hour clock) (0~23).
- minuteint
minute (0~59).
- secondint
second (0~59).
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- Sys_stopRTCAlarm(timeout=3)
Stop alarming.
- Parameters
- timeoutint
Specify the time (sec) to wait before reporting a timeout error. The default is 3 s.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- async Sys_stopRTCAlarm_async()
Stop alarming with async mode.
- Returns
- statusint
Return 0 if executed successfully; return error code otherwise. See here for corresponding error messages.
- close()
Close web device handle.
- Parameters
- verbose: bool, default: True
Whether to print out messages or not.
- Returns
- None
- connect(ip_addr='192.168.1.110', port=7, verbose=True)
Connect handle to web device.
- Parameters
- ip_addrstr of 4 int separated by period.
IP network address of the WPC device to connect to.
- portint, default: 7
TCP port.
- verbose: bool, default: True
Whether to print out messages or not.
- Returns
- None
- disconnect(verbose=True)
Disconnect handle from web device.
- Parameters
- verbose: bool, default: True
Whether to print out messages or not.
- Returns
- None