1'''
2System_Wifi - get_Wifi_DAQ_status.py with synchronous mode.
3
4This example demonstrates how to get basic information such as RSSI & battery & thermo from WifiDAQE3AOD.
5
6-------------------------------------------------------------------------------------
7Please change correct serial number or IP and port number BEFORE you run example code.
8
9For other examples please check:
10 https://github.com/WPC-Systems-Ltd/WPC_Python_driver_release/tree/main/examples
11See README.md file to get detailed usage of this example.
12
13Copyright (c) 2022-2024 WPC Systems Ltd. All rights reserved.
14'''
15
16## Python
17import time
18
19## WPC
20
21from wpcsys import pywpc
22
23def main():
24 ## Get Python driver version
25 print(f'{pywpc.PKG_FULL_NAME} - Version {pywpc.__version__}')
26
27 ## Create device handle
28 dev = pywpc.WifiDAQE3AOD()
29
30 ## Connect to device ## Connect to device
31 try:
32 dev.connect("192.168.5.38") ## Depend on your device
33 except Exception as err:
34 pywpc.printGenericError(err)
35 ## Release device handle
36 dev.close()
37 return
38
39 try:
40 ## Parameters setting
41 timeout = 3 ## second
42
43 ## Get firmware model & version
44 driver_info = dev.Sys_getDriverInfo(timeout)
45 print("Firmware model:" + driver_info[0])
46 print("Firmware version:" + driver_info[-1])
47
48 ## Get RSSI, battery and thermo
49 rssi = dev.Wifi_readRSSI(timeout)
50 battery = dev.Wifi_readBattery(timeout)
51
52 ## Get power & charge status
53 power_status = dev.Wifi_getPowerGoodStatus(timeout)
54 charge_status = dev.Wifi_getChargeStatus(timeout)
55
56 print(f"RSSI: {rssi} dBm")
57 print(f"Battery: {battery} mV")
58 print(f"Power status: {power_status}")
59 print(f"Charge status: {charge_status}")
60 except Exception as err:
61 pywpc.printGenericError(err)
62
63 ## Disconnect network device
64 dev.disconnect()
65
66 ## Release device handle
67 dev.close()
68
69 return
70
71if __name__ == '__main__':
72 main()