1'''
2System_Wifi - get_Wifi_DAQ_status.py with synchronous mode.
3
4This example demonstrates how to get basic information such as RSSI & battery & thermo from WifiDAQE3AH.
5
6-------------------------------------------------------------------------------------
7Please change correct serial number or IP and port number BEFORE you run example code.
8
9For other examples please check:
10 https://github.com/WPC-Systems-Ltd/WPC_Python_driver_release/tree/main/examples
11See README.md file to get detailed usage of this example.
12
13Copyright (c) 2022-2025 WPC Systems Ltd. All rights reserved.
14'''
15
16## WPC
17from wpcsys import pywpc
18
19
20def main():
21 ## Get Python driver version
22 print(f'{pywpc.PKG_FULL_NAME} - Version {pywpc.__version__}')
23
24 ## Create device handle
25 dev = pywpc.WifiDAQE3AH()
26
27 ## Connect to device ## Connect to device
28 try:
29 dev.connect("192.168.5.38") ## Depend on your device
30 except Exception as err:
31 pywpc.printGenericError(err)
32 ## Release device handle
33 dev.close()
34 return
35
36 try:
37 ## Parameters setting
38 timeout = 3 ## [sec]
39
40 ## Get firmware model & version
41 driver_info = dev.Sys_getDriverInfo(timeout)
42 print("Firmware model:" + driver_info[0])
43 print("Firmware version:" + driver_info[-1])
44
45 ## Get RSSI, battery and thermo
46 rssi = dev.Wifi_readRSSI(timeout)
47 battery = dev.Wifi_readBattery(timeout)
48
49 ## Get power & charge status
50 power_status = dev.Wifi_getPowerGoodStatus(timeout)
51 charge_status = dev.Wifi_getChargeStatus(timeout)
52
53 print(f"RSSI: {rssi} dBm")
54 print(f"Battery: {battery} mV")
55 print(f"Power status: {power_status}")
56 print(f"Charge status: {charge_status}")
57 except Exception as err:
58 pywpc.printGenericError(err)
59
60 finally:
61 ## Disconnect network device
62 dev.disconnect()
63
64 ## Release device handle
65 dev.close()
66
67
68if __name__ == '__main__':
69 main()