1'''
2System_Wifi - set_and_get_RTC.py with synchronous mode.
3
4This example demonstrates how to set and get RTC from WifiDAQE3A.
5
6-------------------------------------------------------------------------------------
7Please change correct serial number or IP and port number BEFORE you run example code.
8
9For other examples please check:
10 https://github.com/WPC-Systems-Ltd/WPC_Python_driver_release/tree/main/examples
11See README.md file to get detailed usage of this example.
12
13Copyright (c) 2022-2024 WPC Systems Ltd. All rights reserved.
14'''
15
16## Python
17import time
18
19## WPC
20
21from wpcsys import pywpc
22
23def main():
24 ## Get Python driver version
25 print(f'{pywpc.PKG_FULL_NAME} - Version {pywpc.__version__}')
26
27 ## Create device handle
28 dev = pywpc.WifiDAQE3A()
29
30 ## Connect to device
31 try:
32 dev.connect("192.168.5.38") ## Depend on your device
33 except Exception as err:
34 pywpc.printGenericError(err)
35 ## Release device handle
36 dev.close()
37 return
38
39 try:
40 ## Parameters setting
41 delay = 1 ## second
42 timeout = 3 ## second
43
44 ## Get firmware model & version
45 driver_info = dev.Sys_getDriverInfo(timeout)
46 print("Model name: " + driver_info[0])
47 print("Firmware version: " + driver_info[-1])
48
49 ## Set RTC
50 err = dev.Sys_setRTC(2023, 5, 8, 15, 8, 7, timeout)
51 print(f"Set RTC to 2023-05-08, 15:08:07 , status: {err}")
52
53 for i in range(10):
54 ## Get RTC
55 print(f"Get RTC: {dev.Sys_getRTC()}")
56
57 time.sleep(delay) ## delay [s]
58
59 except Exception as err:
60 pywpc.printGenericError(err)
61
62 ## Disconnect network device
63 dev.disconnect()
64
65 ## Release device handle
66 dev.close()
67
68 return
69
70if __name__ == '__main__':
71 main()