1'''
2System_ETH - get_network_info.py with synchronous mode.
3
4This example demonstrates how to get hardware & network information from EthanP.
5
6First, get hardware information such as firmware model & version.
7Last, get network information such as IP & submask & MAC.
8
9-------------------------------------------------------------------------------------
10Please change correct serial number or IP and port number BEFORE you run example code.
11
12For other examples please check:
13 https://github.com/WPC-Systems-Ltd/WPC_Python_driver_release/tree/main/examples
14See README.md file to get detailed usage of this example.
15
16Copyright (c) 2022-2024 WPC Systems Ltd. All rights reserved.
17'''
18
19## Python
20import time
21
22## WPC
23
24from wpcsys import pywpc
25
26def main():
27 ## Get Python driver version
28 print(f'{pywpc.PKG_FULL_NAME} - Version {pywpc.__version__}')
29
30 ## Create device handle
31 dev = pywpc.EthanP()
32
33 ## Connect to device
34 try:
35 dev.connect("192.168.1.110") ## Depend on your device
36 except Exception as err:
37 pywpc.printGenericError(err)
38 ## Release device handle
39 dev.close()
40 return
41
42 try:
43 ## Parameters setting
44 timeout = 3 ## second
45
46 ## Get firmware model & version
47 driver_info = dev.Sys_getDriverInfo(timeout)
48 print("Model name: " + driver_info[0])
49 print("Firmware version: " + driver_info[-1])
50
51 ## Get IP & submask
52 ip_addr, submask = dev.Net_getIPAddrAndSubmask(timeout)
53 print(f"IP: {ip_addr}")
54 print(f"Submask: {submask}")
55
56 ## Get MAC
57 mac = dev.Net_getMACAddr(timeout)
58 print(f"MAC: {mac}")
59 except Exception as err:
60 pywpc.printGenericError(err)
61
62 ## Disconnect network device
63 dev.disconnect()
64
65 ## Release device handle
66 dev.close()
67
68 return
69
70if __name__ == '__main__':
71 main()