AI on demand once

 1'''
 2AI - AI_on_demand_once.py with synchronous mode.
 3
 4This example demonstrates the process of obtaining AI data in on demand mode.
 5Additionally, it retrieve AI data from EthanA2.
 6
 7To begin with, it demonstrates the steps to open the AI and configure the AI parameters.
 8Next, it outlines the procedure for reading the AI on demand data.
 9Finally, it concludes by explaining how to close the AI.
10
11-------------------------------------------------------------------------------------
12Please change correct serial number or IP and port number BEFORE you run example code.
13
14For other examples please check:
15    https://github.com/WPC-Systems-Ltd/WPC_Python_driver_release/tree/main/examples
16See README.md file to get detailed usage of this example.
17
18Copyright (c) 2022-2024 WPC Systems Ltd. All rights reserved.
19'''
20
21## Python
22import time
23
24## WPC
25
26from wpcsys import pywpc
27
28
29def main():
30    ## Get Python driver version
31    print(f'{pywpc.PKG_FULL_NAME} - Version {pywpc.__version__}')
32
33    ## Create device handle
34    dev = pywpc.EthanA2()
35
36    ## Connect to device
37    try:
38        dev.connect("192.168.1.110") ## Depend on your device
39    except Exception as err:
40        pywpc.printGenericError(err)
41        ## Release device handle
42        dev.close()
43        return
44
45    try:
46        ## Parameters setting
47        port = 0 ## Depend on your device
48        mode = 0
49        timeout = 3 ## second
50        
51
52        ## Get firmware model & version
53        driver_info = dev.Sys_getDriverInfo(timeout)
54        print("Model name: " + driver_info[0])
55        print("Firmware version: " + driver_info[-1])
56
57        ## Open AI
58        err = dev.AI_open(port, timeout)
59        print(f"AI_open in port {port}, status: {err}")
60        
61
62        ## Set AI acquisition mode to on demand mode (0)
63        err = dev.AI_setMode(port, mode, timeout)
64        print(f"AI_setMode {mode} in port {port}, status: {err}")
65
66        ## Read AI
67        ai_list = dev.AI_readOnDemand(port, timeout)
68        print(f"Data in port {port}: {ai_list}")
69
70        ## Close AI
71        err = dev.AI_close(port, timeout)
72        print(f"AI_close in port {port}, status: {err}")
73    except Exception as err:
74        pywpc.printGenericError(err)
75
76    ## Disconnect device
77    dev.disconnect()
78
79    ## Release device handle
80    dev.close()
81
82    return
83
84if __name__ == '__main__':
85    main()