1'''
2SD - SD_write.py with asynchronous mode.
3
4This example demonstrates how to write a message in SD card from WifiDAQE3AOD.
5
6-------------------------------------------------------------------------------------
7Please change correct serial number or IP and port number BEFORE you run example code.
8
9For other examples please check:
10 https://github.com/WPC-Systems-Ltd/WPC_Python_driver_release/tree/main/examples
11See README.md file to get detailed usage of this example.
12
13Copyright (c) 2022-2024 WPC Systems Ltd. All rights reserved.
14'''
15
16## Python
17import asyncio
18
19## WPC
20
21from wpcsys import pywpc
22
23async def main():
24 ## Get Python driver version
25 print(f'{pywpc.PKG_FULL_NAME} - Version {pywpc.__version__}')
26
27 ## Create device handle
28 dev = pywpc.WifiDAQE3AOD()
29
30 ## Connect to device
31 try:
32 dev.connect("192.168.5.38") ## Depend on your device
33 except Exception as err:
34 pywpc.printGenericError(err)
35 ## Release device handle
36 dev.close()
37 return
38
39 try:
40 ## Parameters setting
41 filename = "WPC_test.txt"
42 write_data = "WPC Systems Ltd"
43 mode = 0 ## 0 : write, 1 : read
44
45 ## Open file in sdcard
46 err = await dev.SD_openFile_async(filename, mode)
47 print(f"SD_openFile_async, status: {err}")
48
49 ## Get sdcard storage
50 storage = await dev.SD_getStorage_async()
51 print(f"SD_getStorage_async: {storage}")
52
53 ## Write data in sdcard
54 err = await dev.SD_writeFile_async(write_data)
55 print(f"SD_writeFile_async, status: {err}")
56
57 ## Close file in sdcard
58 err = await dev.SD_closeFile_async()
59 print(f"SD_closeFile_async, status: {err}")
60 except Exception as err:
61 pywpc.printGenericError(err)
62
63 ## Disconnect network device
64 dev.disconnect()
65
66 ## Release device handle
67 dev.close()
68
69 return
70
71def main_for_spyder(*args):
72 if asyncio.get_event_loop().is_running():
73 return asyncio.create_task(main(*args)).result()
74 else:
75 return asyncio.run(main(*args))
76
77if __name__ == '__main__':
78 asyncio.run(main()) ## Use terminal
79 # await main() ## Use Jupyter or IPython(>=7.0)
80 # main_for_spyder() ## Use Spyder