1'''
2AI - AI_on_demand_once.py with asynchronous mode.
3
4This example demonstrates the process of obtaining AI data in on demand mode.
5Additionally, it retrieve AI data from WifiDAQE3AH.
6
7To begin with, it demonstrates the steps to open the AI and configure the AI parameters.
8Next, it outlines the procedure for reading the AI on demand data.
9Finally, it concludes by explaining how to close the AI.
10
11-------------------------------------------------------------------------------------
12Please change correct serial number or IP and port number BEFORE you run example code.
13
14For other examples please check:
15 https://github.com/WPC-Systems-Ltd/WPC_Python_driver_release/tree/main/examples
16See README.md file to get detailed usage of this example.
17
18Copyright (c) 2022-2025 WPC Systems Ltd. All rights reserved.
19'''
20
21## WPC
22from wpcsys import pywpc
23
24## Python
25import asyncio
26import sys
27sys.path.insert(0, 'src/')
28
29
30async def main():
31 ## Get Python driver version
32 print(f'{pywpc.PKG_FULL_NAME} - Version {pywpc.__version__}')
33
34 ## Create device handle
35 dev = pywpc.WifiDAQE3AH()
36
37 ## Connect to device
38 try:
39 dev.connect("192.168.5.38") ## Depend on your device
40 except Exception as err:
41 pywpc.printGenericError(err)
42 ## Release device handle
43 dev.close()
44 return
45
46 try:
47 ## Parameters setting
48 port = 0 ## Depend on your device
49 mode = 0
50
51
52 ## Get firmware model & version
53 driver_info = await dev.Sys_getDriverInfo_async()
54 print(f"Model name: {driver_info[0]}, Firmware version: {driver_info[-1]} ")
55
56 ## Open AI
57 err = await dev.AI_open_async(port)
58 print(f"AI_open_async in port {port}, status: {err}")
59
60
61 ## Set AI acquisition mode to on demand mode (0)
62 err = await dev.AI_setMode_async(port, mode)
63 print(f"AI_setMode_async {mode} in port {port}, status: {err}")
64
65 ## Read AI
66 ai_list = await dev.AI_readOnDemand_async(port)
67 print(f"data in port {port}: {ai_list}")
68
69 ## Close AI
70 err = await dev.AI_close_async(port)
71 print(f"AI_close_async in port {port}, status: {err}")
72 except Exception as err:
73 pywpc.printGenericError(err)
74
75 finally:
76 ## Disconnect device
77 dev.disconnect()
78
79 ## Release device handle
80 dev.close()
81
82
83def main_for_spyder(*args):
84 if asyncio.get_event_loop().is_running():
85 return asyncio.create_task(main(*args)).result()
86 else:
87 return asyncio.run(main(*args))
88
89
90if __name__ == '__main__':
91 asyncio.run(main()) ## Use terminal
92 # await main() ## Use Jupyter or IPython(>=7.0)
93 # main_for_spyder() ## Use Spyder