DO blinky port

 1'''
 2DIO - DO_blinky_port.py with asynchronous mode.
 3
 4This example illustrates the process of writing a high or low signal to a DO port from USBDAQF1RD.
 5
 6To begin with, it demonstrates the steps required to open the DO port.
 7Next, in each loop, a different voltage output is applied, resulting in a blinking effect.
 8Lastly, it concludes by closing the DO port.
 9
10-------------------------------------------------------------------------------------
11Please change correct serial number or IP and port number BEFORE you run example code.
12
13For other examples please check:
14    https://github.com/WPC-Systems-Ltd/WPC_Python_driver_release/tree/main/examples
15See README.md file to get detailed usage of this example.
16
17Copyright (c) 2022-2024 WPC Systems Ltd. All rights reserved.
18'''
19
20## Python
21import asyncio
22
23## WPC
24
25from wpcsys import pywpc
26
27
28async def main():
29    ## Get Python driver version
30    print(f'{pywpc.PKG_FULL_NAME} - Version {pywpc.__version__}')
31
32    ## Create device handle
33    dev = pywpc.USBDAQF1RD()
34
35    ## Connect to device
36    try:
37        dev.connect("default") ## Depend on your device
38    except Exception as err:
39        pywpc.printGenericError(err)
40        ## Release device handle
41        dev.close()
42        return
43
44    try:
45        ## Parameters setting
46        port = 0 ## Depend on your device
47
48        ## Get firmware model & version
49        driver_info = await dev.Sys_getDriverInfo_async()
50        print("Model name: " + driver_info[0])
51        print("Firmware version: " + driver_info[-1])
52
53        ## Open port with digital output
54        err = await dev.DO_openPort_async(port)
55        print(f"DO_openPort_async in port {port}, status: {err}")
56
57        ## Toggle digital state for 10 times. Each times delay for 0.5 second
58        for i in range(10):
59            state = await dev.DO_togglePort_async(port)
60            print(state)
61
62            ## Wait for 0.5 second to see led status
63            await asyncio.sleep(0.5)  ## delay [s]
64
65        ## Close port with digital output
66        err = await dev.DO_closePort_async(port)
67        print(f"DO_closePort_async in port {port}, status: {err}")
68    except Exception as err:
69        pywpc.printGenericError(err)
70
71    ## Disconnect device
72    dev.disconnect()
73
74    ## Release device handle
75    dev.close()
76
77    return
78
79def main_for_spyder(*args):
80    if asyncio.get_event_loop().is_running():
81        return asyncio.create_task(main(*args)).result()
82    else:
83        return asyncio.run(main(*args))
84if __name__ == '__main__':
85    asyncio.run(main()) ## Use terminal
86    # await main() ## Use Jupyter or IPython(>=7.0)
87    # main_for_spyder() ## Use Spyder